Table des Matières
Publicité
To fix the fan to the TV 551/701 case execute the
following procedure (see the following figure):
1. Fix the fan to the suitable bracket by means of
the furnished screws;
2. Fix the bracket to the pump body between the
pump and the controller;
3. Connect the fan supply to the P4 connector of
the controller.
TV 551/701 Pump with Standard Rack
Controller
When the TV 551/701 pumps are used with the
standard rack controller, it is necessary to utilize
the air cooling kit model 969-9314.
Fan specification:
− air flow: 25 l/s (51 CFM)
− input voltage: 120 Vac 50-60 Hz
− maximum power: 17 W
− dimensions: 119 x 119 mm (4.69 x 4.79 inches)
To fix the fan to the pump, position it ensuring that
the holes in the plate line up with those in the
pump base.
Insert the respective washers and screws and
tighten with a screwdriver.
Connect the fan to the controller.
40
TECHNICAL INFORMATION
87-900-934-01(D)
Publicité
Table des Matières
