Insignia NS-14FTV Guide De L'utilisateur page 9

Button
MUTE
Number/letter
DISPLAY
SLEEP
BROWSE
CLEAR
CH
VOL
SOUND
CCD
Power/Standby
8
Description
Press to mute the sound.
Press to enter channel numbers and date
settings directly through the remote control.
To enter a two-digit channel, press the two
digits. To enter a three-digit channel, press
and hold the first digit for two seconds until
two dashes appear to the right of the number,
then press the second and third numbers. For
example, to tune channel 123, press and hold
1 for two seconds, press 2, then press 3.
Press to display channel information.
Press to access sleep timer settings.
Press twice to start scanning channels. Press
again to stop the scan and select the current
channel.
Press to remove any menu or display from the
screen and return to TV viewing.
If you are in an OSD menu that has numeric
entries, press to clear the last number you
entered.
When you are watching your TV, press to tune
to a higher-numbered TV channel.
When you are using the OSD, press to select
a menu or menu option.
When you are watching your TV, press to
decrease the volume.
When you are using the OSD, press to scroll
down through menu options.
For models with AV STEREO or BTSC only.
Press to select one of the preset audio
modes.You can select STANDARD, NEWS,
MUSIC, or MEMORY. You can set up your
own sound mode preferences and save them
under the MEMORY sound mode.
Press to turn closed captioning on or off.
Press to turn your TV on and off. If your TV is
in Standby (power saving) mode, press to exit
Standby mode.
www.insignia-products.com
NS-14FTV/NS-20FTV Color TV