Nicer Julietti; Assembly/Using - Genius Nicer Dicer CHEF Mode D'emploi

GB

5 Nicer Julietti

5.1 Assembly/Using

CAUTION!
Risk of cutting injuries!
The blades are extremely sharp. Always hold accessories by the plastic and do not touch the blades
with your hands or other body parts under any circumstances.
Depending on the model, the frame of the Nicer Julietti is either placed into the cutter base or into the
Vario frame. Please check which model you have before you use it.
A
B
32
Instruction Manual
+
+
A
Place the Vario frame into the cutter base and click the narrow Julietti
frame into place.
B
Place the broad Julietti frame into the cutter base by putting the 2
small nibs into the recesses and push the semi-circular tab into the
grip indent until you hear it click into place.
Insert the desired spiral insert into the frame and turn clockwise until
it locks into place. Make sure that the blade is pointing towards the
collecting container after insertion (note the marks on the frame and
spiral insert).
+
+
+