Genius Nicer Dicer CHEF Mode D'emploi page 26

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36
GB
ATTENTION!
If the cutter top does NOT descend fully in one stroke, then DO NOT apply any further force – this may
damage the product. If the food has lodged in the blades, remove it by turning over the blade insert
(to the blunt side) and carefully pushing out the cuttings. Do the same to remove food remnants from
the blades and then use washing detergent and a brush.
The blade inserts may not be used to cut very hard food such as carrots, unpeeled squashes or similar.
Cores and pits must be removed before processing and the food may need to be peeled.
Before using, read the 'Assembly' section. Only use the product if it has been assembled correctly.
26
Instruction Manual
Place the required blade insert into the cutter base by putting the 2
small nibs into the recesses and push the semi-circular tab into the
grip indent until you hear it click into place. Please ensure that you
do not touch the blades during use.
Place the item of food onto the cutter and push down the cutter top
firmly using both hands. The food is pushed through the blades and
automatically collected in the collecting container.
To empty the collecting container, simply lift the entire cutter lid
(cutter top and base) and remove.
To remove the blade insert, open the cutter top and remove the
blade insert carefully, using the grip recesses.

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières