Blower Function; Maintenance And Cleaning; Technical Data - ECG VM 3100 HOBBY Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44

Blower function

The vacuum cleaner offers a blower function as well. If necessary, attach the hose to the air outlet (the
same as when you install on the suction opening) and attach accessories that you want to use.

MAINTENANCE AND CLEANING

Attention:
Before any maintenance or cleaning always unplug the power cord from the power outlet.
Before storing the vacuum cleaner, you have to empty the container of the vacuum cleaner and clean the
filter.
You can wrap the power cord around the body of the vacuum cleaner, floor nozzle along with the tube and
hose can be attached to the bracket on the side of the vacuum cleaner. Vacuum cleaner should be stored
in a room protected from the weather.
When necessary, you can clean the body and the container of the vacuum cleaner using damp cloth. The
internal parts of the vacuum cleaner should not be penetrated by water. Never use solvents or any other
aggressive cleaners or abrasives.
Never immerse the vacuum cleaner into water or any other liquid and do not leave it under running water.
No parts of the vacuum cleaner can be washed in the dishwasher.
Over time, hair or other debris can wrap around the wheels and on the floor nozzle. Remove them regularly
to ensure easy handling of the vacuum cleaner. We do not recommend to lubricate or treat with oil the
wheels or the pulleys of the floor nozzle. Dirt would catch on the greased parts even easier.
Note:
You can find replacement filters for the vacuum cleaner VM 3100 under the name ECG VM 3100 Hobby
HEPA filter.
TROUBLESHOOTING
Before referring to a service centre, check the following list of common problems and how to remove
them.
Problem
Possible cause
The motor will not
The vacuum cleaner is not
start.
powered.
The suction power
Clogged hose or tube, dirty
is reduced.
filters.

TECHNICAL DATA

Range: 9.1 m
Volume of the container: 8 l
Weight: 5 kg
Nominal voltage: 220–240 V~ 50/60 Hz
Solution
Check the power cord and plug. Refer to an authorized
service centre if the problems persist.
Remove foreign objects from the hose or tube, replace
filters.
Nominal input power: 800 W
Maximum power consumption: 1,000 W
Noise level: 82 dB
Filter: HEPA filter, foam filter
GB
29
29

Publicité

Table des Matières
loading

Table des Matières