Your New Appliance; Customer Service - Siemens DE 1113415 Notice De Montage Et D'utilisation

Masquer les pouces Voir aussi pour DE 1113415:
Table des Matières

Publicité

Operating instructions
Please read the operating instructions carefully before
you use the appliance!
Safety information
This appliance is intended for domestic use or for house-
hold-based non-commercial applications. Household-
based applications include, e.g. usage in employees
catering facilities for shops, offices, agricultural and
other commercial operations, as well as usage by guests
of guest houses, small hotels and similar residential
establishments.
Risk of electric shock!
Switch off the mains voltage supply immediately if
a fault occurs.
We do not accept liability for damage resulting from
failure to heed these instructions.
The continuous-flow heater may only be connected
and put into operation by a qualified professional.
Repairs may only be undertaken by a suitably qualified
specialist to avoid potential sources of danger.
The continuous-flow heater may only be installed in a
frost-free room.
Persons (including children) with diminished bodily, sen-
sory or mental perception, or those who lack knowledge or
experience should not operate the appliance, unless they
are monitored or have received instruction concerning use
of the appliance by persons responsible for their safety.
Keep children away from the appliance. Please moni-
tor children to ensure that they do not play with the
appliance.
The mixer and the warm water pipe may be hot.
Please switch off all fuses immediately if a malfunction
occurs. Immediately shut off the cold water supply to the
appliance should it leak. The malfunction can only be re-
paired by a specialist or an authorised service agent.

Your new appliance

The electronic continuous-flow heater "electronic comfort" is
intended exclusively for heating water which flows through
the appliance.
The continuous-flow heater switches on and heats the water
when the warm water tap is opened. It switches off as soon
as the tap is closed.
en
Operating the continuous-flow
heater
Selecting shower temperature
You can select the desired temperature by turning the con-
tinuously variable rotary knob, which can be adjusted from
30 °C to 60 °C.
Conserving energy and water
Mixing in of cold water in the fitting requires unnecessary
water and energy. You should therefore set the desired tem-
perature directly on the continuous-flow heater and then
open the water tap.
In "e" position the appliance is operated economically.
Using the appliance after switching off
the water supply
Switch off the appliance (unscrew the fuse in the house
electrical installation).
Open the warm water tap and keep it open until the air
has been completely forced out of the water pipe.
Switch the fuse back on again.
The appliance is now ready to operate.
Cleaning
Only wipe off the appliance using a moist cloth. Do not
use acidic or abrasive cleaning materials.
Do not use a steam cleaner.

Customer Service

We ask you to always provide the E-No. and the FD-No. of
your appliance when calling in a customer service engineer.
You will find the numbers on the inner side of the fold up
operating panel on the continuous-flow heater.
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

De 1821415De 2427415De 4151821De 4152427

Table des Matières