Incorrect Measurements; Cleaning & Maintenance - Inventum PW710BG Mode D'emploi

7 | INCoRRECT mEASUREmENTS

If the scale detects an error during measurement, this is
indicated with ----.
Possible causes of errors
The maximum load-bearing
capacity of 180 kg (396 lbs) was
exceeded ----.
Causes of error
only weigh the maximum
permissible weight.
8 | CLEANING & mAINTENANCE
The scale should be cleaned occasionally.
Dirt and dust has a tendency to collect on the rubber
electrodes. always stand on the scale barefoot or wearing
socks as the rubber surfaces will quickly become dirty if
you wear shoes. Use a damp cloth to clean the scale. Do
not use abrasive detergents and never immerse the scale
in water.
• Do not use aggressive solvents or cleaning agents!
• Never immerse the scale in water or any other
liquids.
• Handle the scale with care, protect the scale from
impact with hard object and do not drop it.
Your scale is fitted with a change battery indicator. If the
scale is operating with batteries which are too weak,
Lo appears on the display and the scale will switch
off automatically. In this case, the batteries must be
exchanged (2 x cr2032, 3V). If necessary please use a
small screwdriver to remove the batteries.
Batteries can contain toxins that are harmful to health and
the environment. The used, completely drained standard
and rechargeable batteries must be disposed of in specially
marked collection containers, at toxic waste collection
points or electrical product retailers. You are legally
obligated to dispose of the batteries.
Note: Batteries containing pollutants are marked with the
following symbols: pb = Battery contains lead, cd = Battery
contains cadmium, hg = Battery containers mercury.
9