Incorrect Measurements; Cleaning & Maintenance - Inventum PW705BG Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10
incorrect measurement
If the scale detects an error during measurement, this is
indicated with ----.
Possible causes of errors
The electrical resistance
between the electrodes and
the soles of your feet is too
high (e.g. with heavily cal-
lused skin).
The fat percentage is outside
the measurable range (less
than 3% or greater than
50%).
The water percentage is
outside the measurable
range (less than 25% or
greater than 75%).
The muscle and bone
percentages are outside the
measurable range - age and
gender related (less than
25% or greater than 75%).
The maximum load-bearing
capacity of 150 kg (330 lbs)
was exceeded ----.
Causes of error
Repeat weighing barefoot.
Slightly moisten the soles
of your feet if necessary.
Remove the calluses on the
soles of your feet if neces-
sary.
Repeat weighing barefoot.
Slightly moisten the soles of
your feet if necessary.
Repeat weighing barefoot.
Slightly moisten the soles of
your feet if necessary.
Repeat weighing barefoot.
Slightly moisten the soles of
your feet if necessary.
Only weigh the maximum
permissible weight.
11
cleaning & maintenance
The scale should be cleaned occasionally. Dirt and dust has
a tendency to collect on the rubber electrodes. Always stand
on the scale barefoot or wearing socks as the rubber surfaces
will quickly become dirty if you wear shoes. Use a damp cloth
to clean the scale. Do not use abrasive detergents and never
immerse the scale in water.
• Do not use aggressive solvents or cleaning agents!
• Never immerse the scale in water or any other liquids.
• Handle the scale with care, protect the scale from impact
with hard object and do not drop it.
Your scale is fitted with a change battery indicator. If the scale is
operating with batteries which are too weak, Lo appears on the
display and the scale will switch off automatically. In this case,
the batteries must be exchanged (2 x CR2032, 3V). If necessary
please use a small screwdriver to remove the batteries.
Batteries can contain toxins that are harmful to health and
the environment. The used, completely drained standard
and rechargeable batteries must be disposed of in specially
marked collection containers, at toxic waste collection points or
electrical product retailers. You are legally obligated to dispose
of the batteries.
Note: Batteries containing pollutants are marked with the
following symbols: Pb = Battery contains lead, Cd = Battery
contains cadmium, Hg = Battery containers mercury.
English
15

Publicité

Table des Matières
loading

Table des Matières