Nilfisk FLOORTEC R 680 P Manuel D'utilisation page 85

Procedure
Spark plug check/cleaning
Nut and screw tightening check
Steering chain cleaning and tension
check
Safety system operation check
Engine speed check
Engine air fi lter element maintenance
Spark plug replacement
Engine cooling system cleaning
Driving belt replacement
Hopper gasket integrity check
Lifted hopper control microswitch
adjustment check
Horizontal hopper control microswitch
adjustment check
Valve clearance check/adjustment
Hopper hydraulic lifting system and
drive system oil change
(1) For the relevant procedure, see the Service Manual.
(2) Or every year.
(3) Or more often in dusty areas.
(4) Maintenance procedures to be performed by an authorised Briggs & Stratton dealer.
(5) If the person in charge for the maintenance considers it necessary.
(6) Change the hydraulic system oil for the fi rst time after 500 hours, then every 2,000 hours or every year.
1463514000(1)2008-05 A
Upon After the fi rst
delivery 5 hours
(1)
USER MANUAL
Every 10
Every 25 Every 50
hours or
hours hours
before use
FLOORTEC R 680 P
ENGLISH
Every Every
Every
100 200
year
hours hours
(1)
(1)
(1)
(1)
(3)
(2)
(2)
(1) (5)
(1)
(1)
(1)
(4)
(1) (6)
19