Hoover HMGV28GDFB Mode D'emploi page 14

OPERATION INSTRUCTION
This microwave oven uses modern electronic control to adjust cooking parameters to meet
your needs better for cooking.
1. Clock Setting
When the microwave oven is electrified, the oven will display "0:00", buzzer will ring once.
1) Press " " twice, the hour figures flash.
2) Press " or
3) Press " ", the minute figures will flash.
4) Press " or
5) Press " " to finish clock setting. ":" will flash, the clock setting has been finished.
Note: 1) If the clock is not set, the clock would not function when powered.
2) During the process of clock setting, if you press "
previous status automatically.
2. Microwave Cooking
1) Press the " " key once, and "P100" will display.
2) Press "
" for times or press "
10%. "P100", "P80", "P50", "P30", "P10" will display in order.
3) Press " " to confirm.
4) Press " or
5) Press " " to start cooking.
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min :
1---5 min :
5---10 min :
10---30 min :
30---95 min :
Microwave Power Chart
Microwave Power
Display
" to adjust the hour figures, the input time should be within 0--23.
" to adjust the minute figures, the input time should be within 0--59.
or
" to select the cooking time. (The time setting should be 0:05- 95:00.)
5 seconds
10 seconds
30 seconds
1 minute
5 minutes
100% 80%
P100 P80
GB
", the oven will go back to the
" to select the microwave power from 100% to
50%
P50
12
30% 10%
P30 P10