Table Des Matières; Packing - Dolmar MS-3310 Manuel D'emploi Et De Sécurité

Masquer les pouces Voir aussi pour MS-3310:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Thank you for choosing a DOLMAR product!
We trust that you will be a satisfied customer. By choos-
ing a DOLMAR you have chosen one of the most ad-
vanced brushcutters. We are the world´s oldest manu-
facturer of gasoline powered saws (1927), giving us
almost 7 decades of experience with two-stroke-engine
powered tools.
The MS-3310, MS-4010 and MS-4510 brushcutters com-
bine the benefits of state-of-the-art technology with ergo-
nomic design, and are professional machines intended
for all types of use.
The high-efficiency engine is the heart of the brushcutter,
and has been completely redesigned. Special cylinder
geometry,
computerized
maintenance-free electronic ignition give high perform-
ance with low fuel consumption.
The drive shaft is designed for continuous heavy-duty
use, with 9 bearings and a tough centrifugal clutch. The
fuel tank is positioned forward, for the right c to make long
jobs easier and less fatiguing.
Some of the other technical features of your DOLMAR
brushcutter are:
-
Precision-tuned vibration damping
Four conical hollow absorption elements, between
the engine and the main tube and between the engine
and the tank unit with handles, reduce felt vibration to
a minimum, for comfortable, untiring long-term work-
ing.
-
Multi-function handle
All important controls are located on the right handle
for ease of operation.
-
Easy cutting-tool change
A new locking system developed by DOLMAR allows
you to lock the cutting tool for simple, safe blade
changing.
-
High-efficiency noise reduction
The completely encapsulated engine and the
resonator-chamber intake muffler make this brush-
cutter remarkably quiet.
The following industrial property rights apply: US 512606,
EP 0438611, EP 0696414, GBM 9106194, GBM
9412925.
To ensure your own safety and to get the maximum
performance out of your DOLMAR brushcutter, we urge
you to
read this instruction manual carefully before putting
the brushcutter into operation and strictly observe
all of the safety regulations! Failure to do so can
result in serious injury to the operator and/or
bystanders!

Packing

Your DOLMAR brushcutter comes in a cardboard box to
protect it from shipping damage.
Cardboard is a raw material. We encourage you to re-use
the box or recycle it (waste paper).
RE Y
2
control
times,
and
Table of contents
Packing ...................................................................... 2
Delivery inventory ..................................................... 3
Explanation of symbols ........................................... 3
General precautions .............................................. 4
Personal protective equipment .............................. 4
Handling fuels / Refuelling ..................................... 5
Putting into operation .......................................... 5-6
Kickback ................................................................. 6
Applications for cutting tools .................................. 7
Transport ............................................................... 7
Storage .................................................................. 7
Maintenance .......................................................... 8
First Aid .................................................................. 8
Technical data ........................................................... 9
Components .............................................................. 9
Mounting the tube handle .................................... 10
Installing the cutter guard ............................... 10-11
Installing the trimmer head .................................. 12
Installing the line cutter ........................................ 12
chisel type saw blade .......................................... 13
The gear box ........................................................ 13
Fuel mixture ......................................................... 14
Storage of fuel ..................................................... 14
Refuelling ............................................................. 14
Putting on the harness ......................................... 15
Balancing the brushcutter .................................... 15
Starting the engine............................................... 16
Carburetor adjustment ......................................... 17
Sharpening of cutting tools .................................. 18
Trimmer head ...................................................... 19
Starter cable replacement .............................. 19-20
Cleaning the air filter ............................................ 20
Checking the muffler bolts ................................... 21
Suction head in the fuel tank ............................... 22
Muffler guard (for USA only) ................................ 22
Information about the gear box............................ 22
Service, spare parts and guarantee ................. 23-24
Troubleshooting...................................................... 24
Extract from the spare part list ............................. 25
Notes ........................................................................ 25
Service centres (see enclosure)
Page

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ms-4010Ms-4510

Table des Matières