Product Description And Specifications - Bosch GSR Professional 9,6-2 Notice Originale

OBJ_BUCH-585-004.book Page 13 Tuesday, April 5, 2011 7:36 AM
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
Use only original Bosch batteries with the voltage list-
ed on the nameplate of your power tool. When using oth-
er batteries, e. g. imitations, reconditioned batteries or
other brands, there is danger of injury as well as property
damage through exploding batteries.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plastic.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck
2 Front sleeve
3 Rear sleeve
4 Torque preselection ring
5 Gear selector
6 Battery*
7 Battery unlocking button
8 Screwdriver bit*
9 Rotational direction switch
Technical Data
Cordless Drill/Driver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque for hard/soft screwdriving
application according to ISO 5393
Maximum drilling diameter (1st/2nd gear)
– Steel
– Wood
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Bosch Power Tools
10 On/Off switch
11 Handle (insulated gripping surface)
12 Universal bit holder*
13 Securing screw for keyless chuck
14 Allen Key**
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
**Commercially available (not included in the delivery scope)
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 80 dB(A); Sound power level 91 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined accord-
ing to EN 60745:
Drilling into metal: Vibration emission value a
certainty K=1.5 m/s
Screwdriving: Vibration emission value a
tainty K=1.5 m/s
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
GSR 9,6-2 GSR 12-2
Professional Professional
3 601 J18 L.. 3 601 J18 J..
V= 9.6
-1
min 0–400
-1
min 0–1000 0–1200
Nm 25/10
mm 10/10
mm 20/13
English | 13
<2.5 m/s
h
2
,
<2.5 m/s
h
2
.
GSR 14,4-2
Professional Professional
3 601 J18 G.. 3 601 J18 3..
12 14.4
0–400 0–400
0–1400
27/11 30/15
12/12 12/12
23/14 26/19
2 609 140 810 | (5.4.11)
2
, Un-
2
, Uncer-
GSR 18-2
18
0–400
0–1250
45/22
12/12
29/22