Technische Daten - WIKA MicroTronic M-10 Mode D'emploi

M-10 / M-11
5. Specifications
Specifications
Pressure ranges
Over pressure safety
Burst pressure
Pressure ranges
Over pressure safety
Burst pressure
Materials
Wetted parts

O-ring

 Case
Internal transmission fluid
Power supply UB
Response time (10 ... 90 %)
Dielectric strength
Accuracy
Non-linearity
Non-repeatability
1-year stability
Reference conditions
Relative humidity

Permissible temperature of
Medium

Ambience

Storage

Compensated temperature range
Temperature coefficients in
compensated temp range
Mean TC of zero

Mean TC of range

CE-conformitiy
Pressure equipment directive

EMC directive

Shock resistance
Vibration resistance
Wiring protection
Short-circuit proofness

Reverse polarity protection

Mass
When designing your plant, take into account that the stated values (e.g. burst
pressure, over pressure safety) apply depending on the material, thread and
sealing element used.
5. Technische Daten

Technische Daten

Messbereich
Überlastgrenze
Berstdruck
Messbereich
Überlastgrenze
Berstdruck
Werkstoff
Messstoffberührte Teile

O-Ring

Gehäuse

Interne Übertragungsflüssigkeit
Model M-10 / M-11
bar 16
1)
bar 32
bar 160
bar 160
bar 320
bar 1000
1)
Only Model M-10.
2)
For model M-11: max. 1500 bar.
Stainless steel
NBR (only for version with flush diaphragm)
Stainless steel
Synthetic oil (only for version with flush diaphragm)
UB in DC 10 ... 36 V (14 ... 36 V with signal output 0.1 ... 10 V;
8 ... 36 V with signal output 1 ... 5 V)
ms ≤ 2
DC 500 V
% of span ≤ 0.5
4)
Including non-linearity, hysteresis, non-repeatabiity, zero point and full scale error
(corresponds to error of measurement per IEC 61298-2). Adjusted in vertical
mounting position with lower pressure connection.
% of span ≤ 0.2
% of span ≤ 0.1
% of span ≤ 0.2
% up to 90
-40 ... +100 °C
-40 ... +100 °C
-40 ... +100 °C
-20 ... +85 °C
% of span ≤ 0.2 / 10 K (M-11: ≤ 0.3 with pressure range 25 bar)
% of span ≤ 0.2 / 10 K
97/23/EC
2004/108/EC, EN 61 326 Emission (Group 1, Class B) and
Immunity (industrial locations)
g 800 according to IEC 60068-2-27 (mechanical shock)
g 20 according to IEC 60068-2-6 (vibration under resonance)
S+ towards U-
U+ towards U-
kg Approx. 0.05
Typ M-10 / M-11
bar 16
1)
bar 32
bar 160
bar 160
bar 320
bar 1000
1)
Nur für Typ M-10 gültig.
2)
Bei Typ M-11: max. 1500 bar.
CrNi-Stahl
NBR (nur bei frontbündiger Membrane)
CrNi-Stahl
Synthetisches Öl (nur bei frontbündiger Membrane)
GB
25 40
50 80
250 400
250 400
500 800
1200 1700
2)
4)
(BFSL) according to IEC 61298-2
(at reference conditions)
25 40
50 80
250 400
250 400
500 800
1200 1700
2)
D F
60 100
120 200
550 800
600 1000
1)
1200 1500
2400 3000
2)
-40 ... +212 °F
-40 ... +212 °F
-40 ... +212 °F
-4 ... +185 °F
60 100
120 200
550 800
600 1000
1)
1200 1500
2400 3000
2)