Bosch Xeo Notice Originale page 24

Masquer les pouces Voir aussi pour Xeo:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
OBJ_BUCH-377-009.book Page 24 Monday, December 11, 2017 11:03 AM
24 | English
Transport
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements. The user can transport the batteries by road without further require-
ments.
When being transported by third parties (e.g.: air transport or forwarding agency),
special requirements on packaging and labelling must be observed. For preparation
of the item being shipped, consulting an expert for hazardous material is required.
Dispatch batteries only when the housing is undamaged. Tape or mask off open
contacts and pack up the battery in such a manner that it cannot move around in the
packaging.
Please also observe possibly more detailed national regulations.
Disposal
The machine, rechargeable batteries, accessories and packaging should be
sorted for environmental-friendly recycling.
Do not dispose of power tools and batteries/rechargeable batteries into
household waste!
Only for EC countries:
According to the European Guideline 2012/19/EU, power tools that are no longer
usable, and according to the European Guideline 2006/66/EC, defective or used
battery packs/batteries, must be collected separately and disposed of in an environ-
mentally correct manner.
Batteries no longer suitable for use can be directly returned at:
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a
product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Battery packs/batteries:
 Integrated batteries may only be removed for disposal by qualified person-
nel. Opening the housing shell can destroy the power tool.
To remove the battery from the power tool, press the On/Off switch 1 until the bat-
tery is fully discharged. Unscrew the screws on the housing and remove the housing
shell in order to remove the battery. To prevent a short circuit, disconnect the con-
nectors on the battery one at a time and then isolate the poles. Even when fully dis-
charged, the battery still contains a residual capacity, which can be released in case
of a short circuit.
Li-ion:
Please observe the instructions in section "Transport", page 24.
Subject to change without notice.
1 609 92A 48X | (11.12.17)
Bosch Power Tools

Publicité

Table des Matières
loading

Table des Matières