Traktor Le Controller Mapping - Numark OMNI CONTROL Guide D'utilisation Simplifié

Masquer les pouces Voir aussi pour OMNI CONTROL:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

TRAKTOR LE CONTROLLER MAPPING

15
19
20
16
4
1.
TRACK – You can use the TRACK knob to
scroll through the music on your computer.
Press down on the TRACK knob to preview
the selected track.
2.
DIRECTORY – Pressing this button toggles
between the Browser Tree Window and
List Window so you can browse and select
your tracks within the folders.
3.
LOAD TRACK – Each virtual deck features
a LOAD TRACK button. Selecting a track
and pressing the LOAD TRACK button will
load the track to the corresponding deck.
4.
CUE – The CUE button will return and
pause the track at the last set cue point.
For temporary play of the cue point, you
can hold down the CUE button. The track
will play for as long as the button is held
down and will return to the cue point once it
has been released.
5.
SET CUE - You can use this button to set a
new cue point.
6.
PLAY / PAUSE – Press to begin playing or
to pause the track.
7.
JOG WHEEL – When the deck is stopped,
the JOG WHEEL will scratch the selected
track. When the deck is playing, the JOG
WHEEL will bend the track's pitch.
24
28
10
25
29
11
26
17
11
27
18
11
21
21
3
22
23
8
7
5
6
10
24
12
25
11
13
26
11
27
14
11
21
1
3
22
2
8
9
4
8.
VOLUME – Adjusts the volume of the
corresponding deck.
9.
CROSSFADER – Fades between the
two tracks playing on the virtual decks.
If the crossfader is in the left-most
position, you will only hear the audio
from Deck A. If the crossfader is in the
right-most position, you will only be able
to hear the audio from Deck B. When
the crossfader is in a point between the
two, you will hear both Decks.
10.
GAIN – Adjusts the gain level of the
corresponding deck.
11.
EQ – Use these knobs to adjust the
levels of the Treble, Mid, and Bass
frequencies on each deck.
down on an EQ knob makes it function
like a "kill switch," removing that
frequency band from the music on that
deck.
The LED next to the knob will
illuminate when the Kill feature is
engaged.
knob again.
12.
MASTER – Controls the Master level,
allowing you to change the overall
volume of the mix.
9
28
15
19
29
17
20
18
21
16
23
7
5
6
Pressing
To disengage it press the

Publicité

Table des Matières
loading

Table des Matières