CarKids ISOFIX 0 Mode D'emploi page 21

5.3.6 Hold the child seat with both hands and insert the two ISOFIX arms firmly
into the vehicle's ISOFIX anchoring points until they fasten with a click on
both sides. The red button will change to green on both sides.
5.3.7 Shake the seat to check that it is correctly anchored to the vehicle's
ISOFIX points.
5.3.8 Place your child in the safety seat.
5.3.9 Pass the vehicle seat belt through the bottom of the armrest, ensure the
lap belt is stretched as low as possible over the child's hips, buckle the
vehicle seat belt until it clicks. Place the diagonal belt through the red belt
guide hook. It must pass the middle between child's shoulder and neck.
5.3.10 The insertion guides facilitate the installation of the safety seat with the
aid of the ISOFIX securing points and prevents damage to the upholstery.
When not in use they should be removed and stored in a safe place. In
vehicles with a reclining back the insertion guides should be removed
before the seat is reclined. Problems that may arise are generally the
result of accumulation of dirt or foreign bodies in the insertion guides and
the clasps. To solve this type of problem simply clean the part in question.
NOTE:
Use backrest rotating handle to swivel the seat 180° for forward facing
installation, backrest hanger and L-backrest hanger are hooked each other.
21
EN