CarKids ISOFIX 0 Mode D'emploi page 13

4.4.8 Grasp the metal plate from underneath and turn it into a vertical position.
Push upwards and slide the metal plate through the slot.
4.4.9 Remove the harness buckle with the crotch pad and store it in the
storage bag.
4.5 Cleaning the harness buckle
4.5.1 Open the harness buckle (press the red button).
4.5.2 Grasp the metal plate from underneath and turn it into a vertical position.
4.5.3 Slide the metal plate through the slot.
4.5.4 Remove the harness buckle.
4.5.5 Soak the harness buckle in warm water with washing-up liquid for at
least an hour. Then rinse and dry it thoroughly.
4.6 Adjust the angle of child safety car seat
There are 3 levels adjustment in the child safety car seat. Before fixing a child in
the child restraint system, the seat must be set on the recline position for
rear-facing use or in the sitting position for forward-facing use.
To achieve that, use the recline handle located in front of the child restraint system
between the sitting part and the base to adjust the desired position.
13
EN