Preparation For Work - Agu Froggy Mode D'emploi

Do not attempt to repair the device yourself; it will lead to a loss of warranty! For
repair and maintenance, please contact an authorized service center*.
*The addresses of the service centers are specified on the website agu-baby.com.
INSTRUCTIONS FOR CLEANING AND DISINFECTING THE DEVICE:
Do not use chemically active detergents to clean the device and do not boil
the device.
1. Clean the device with soap and rinse it.
2. Leave the device to dry in air at room temperature.
3. Store the device in a dry, clean place according to the operating conditions.
8

PREPARATION FOR WORK

Remove the device from the packaging material.
For the preparation of water with an ideall, comfortable temperature, it is necessary:
•
to fill the bath with water;
•
to put the thermometer in the water and turn it on;
•
after 30 seconds, evaluate the result*;
•
if necessary, add hot or cold water to the bath, then again evaluate the
result* of measured water temperature.
42