Environmental Regulations - BORETTI BIKP-90 Notice D'emploi

Biphase 400V~2P+N
Put the 1st bridge between terminal 1 and 2, the 2nd between 4 and 5.
Attach the earth to the terminate "earth", the neutral N to terminal 4 or 5, the Phase L1 to the
terminals 1 or 2 and the Phase L2 to the terminal 3.
Triphase 400V~3P+N
Put a bridge between terminal 4 and 5.
Attach the earth to the terminate "earth", the neutral N to terminal 4 or 5, the Phase L1 to the
terminals 1, the Phase L2 to the terminal 2 and the Phase L3 to the terminal 3.
Caution! Be careful that the cables are correctly engaged and tightened.
We cannot be held responsible for any incident resulting from incorrect connection or
which could arise from the use of an appliance which has not been earthed

Environmental Regulations

Should you wish to discard the machine for any
reason, please comply with the following:
Take the machine to the local authorized com-
pany that collects discarded household appli-
ances. Correct processing enable valuable ma-
terials to be recycled in an intelligent manner.
Before discarding your machine it is important
that you cut off the power supply cord and re-
or has been equipped with a faulty earth connection.
move it together with the plug. This machine
has been accorded the appropriate mark in ac-
cordance with European Directive 2002/96EG
regarding discarded electric and electronic
equipment. This directive determines the
standards for the collection and recycling of
discarded equipment that apply to the entire
territory of the European Union.
D
EN
37