Listening To Dab Radio (R-S202D); Preparing The Dab Tuning; Selecting A Dab Radio Station For Reception - Yamaha R-S202 Mode D'emploi

Masquer les pouces Voir aussi pour R-S202:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

LISTENING TO DAB RADIO (R-S202D)

DAB (Digital Audio Broadcasting) uses digital signals for clearer sound and more stable reception compared to analog
signals. This unit can also receive DAB+ (an upgraded version of DAB) that allows for more stations using MPEG-4
audio codec (AAC+), which has a more efficient transmission method.
Note
This unit supports Band III (174 to 240 MHz) only.

Preparing the DAB tuning

Before tuning in to DAB stations, an initial scan must be
performed. When you select the DAB for the first time,
the initial scan is performed automatically.
To listen to a DAB station, connect the antenna as
described in "Connecting the DAB/FM antennas (R-
S202D)" (see page 11).
SLEEP
LINE 1
CD
TUNING
1
Press TUNER to select the tuner as the input
source.
2
Press BAND to select the DAB band.
The initial scan starts. During the scan, the progress is
displayed on the front panel display.
When the scan is complete, the top of the list of the
scanned stations appears on the front panel display.
y
• If no DAB radio stations are found by an initial scan,
"NOT FOUND" will appear on the front panel display,
followed by "OFF AIR". Press BAND twice to re-select
the DAB band and scan again.
• You can check reception strength of each DAB channel
label (see page 29).
• To perform an initial scan again after some DAB radio
stations are stored, select "INIT SCAN" (see page 30) in
the Option menu. If you perform an initial scan again, the
DAB radio stations currently registered to the preset
numbers will be cleared.
LINE 2
LINE 3
TUNER
BAND
BAND
TUNER
MEMORY
Selecting a DAB radio station for
reception
You can select a DAB radio station from the stations
stored by the initial scan.
SLEEP
LINE 1
CD
TUNING
TUNING jj / ii
PRESET
1
Press TUNER to select the tuner as the input
source.
2
Press BAND to select the DAB band.
3
Press TUNING jj / ii to select a DAB radio
station.
Note
"OFF AIR" appears when the selected DAB radio station is
currently not available.
LINE 2
LINE 3
TUNER
BAND
BAND
TUNER
MEMORY
INFO
25
En

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

R-s202d

Table des Matières