Attach The Carrier - Axonics SNM System 1401 Manuel D'utilisation

2A) Attach the Carrier
Press the carrier onto the bottom of
1
the Charger. The adhesive pads on
the carrier should face away from
the Charger. Start by pressing with
both fingers at the bottom of the
inner circle of the carrier. Slide your
fingers in opposite directions to the
top of the carrier.
Peel back the protective liner to
2
expose the adhesive on the Carrier.
The Charger is ready to be put on
3
your body.
Note: Use a new carrier every time you
charge to make sure the Charger stays in
place.
22