Facom DB1.RFID Notice Originale page 20

The screen and buttons
 To be recognized by the bag, the tools must be recorded in the database
beforehand using the software provided. Refer to the 'Advanced Mode' section to
use the software.
The Facom DB1.RFID bag operates in 2 different modes: 'Work Mode' or
'Advanced Mode'.
The 'Work mode' allows the bag to be used with the following functions: switch on/off,
automatic scan, list of missing or unknown tools. It is the mode started by default when
the bag is powered on.
The "Advanced mode' is accessible by a 4-digit code and provides access to other
options: modifi cation of the list of tools contained by the bag, management of the
database, access to the software, language selection.
1/ Work Mode – (User)
This section explains how to:
• Power on and off the bag
• List the messages displayed, and the anomalies
• Launch a manual scan.
 Start-up: press the ON/OFF button.
 The bag is ready for use with the number of tools defi ned beforehand by the
manager in the advanced mode when creating the reference list.
NU-DB1.RFID_0216.indd 20
20
3/25/2016 9:14:03 AM