Record Video And Photo; Taking Photos; Recording Video - RC Logger 89050RC Instructions D'utilisation

3. Set the monitor to search for available channels
automatically or manually (auto search is off). If you
activate auto channel search then the monitor briefly
displays "AUTO" and starts flipping through the set
channels. You may manually flip through the channels with
buttons and
4. Once pairing is complete the image is displayed on the
monitor's display.

16. reCord vIdeo and PhoTo

To record video or photos follow these steps:
1. Turn the monitor on and connect a camera.
2. Switch the video switch (13) into position .

Taking photos

To take a photo press the button
displayed briefly to confirm successful taking of photo.
20
.
. The symbol

recording video

> To record video, press and hold the button
3 seconds to start recording. "REC" (C) and the recording
time (I) are displayed.
> To pause recording press the button
shows " ".
> To toggle muting of audio, press button m. This function
only applies to the built-in speaker (6). Output to connected
headphones cannot be muted.
> Press button
> Video size can be controlled via video segment sizes. See
section "Sub-1 Video Segment Size" on page 17 for more
information.
overwrite mode
See section "Sub-1 Overwrite" on page 17 for more
will be
information. Whenever a video is saved, previously saved clips
are overwritten by the latest recording, once storage space is
full.
and the display
to save recording and exit recording mode.
for approx.