Elica SUM1 Guide D'utilisation, D'entretien Et D'installation page 4

Thank you for purchasing a Elica Range Hood.
Please read all the instructions in this manual before installing
Save these instructions for future reference.
Only use this appliance as an exhaust ventilation system for the removal of
cooking vapors. DO NOT use to expel flammable substances or any other materials
or vapors.
The installation
instal­lers, service technicians or persons with similar qualified background.
DO NOT attempt to install this appliance yourself.
Ensure that electrical
in­stallation.
grounded and conform to all applicable codes and standards.
Make sure all existing duct work is clean of grease build up, or duct work
should be replaced, if necessary, to avoid the possibility of a grease fire.
Check all joints on ductwork to ensure proper connection and all joints should
be properly taped.
damage any hidden
sufficient air return vents to replace the exhausted air.
Fan ducts should always be vented to the outside of your home and never into
spaces within walls, ceilings, lofts or attics.
for ducting. The exhaust point of the blower requires a 6" round
4
WARNING
the appliance.
procedures in
power
All electrical wiring must be properly installed, insulated and
Be careful when cutting through ceilings or walls not to
pipes or electrical
this manual
is turned off
wiring.
are intended for
at source before
Ensure your
Only use rigid, smooth steel
qualified
commencing
kitchen has
connec­tion.