Sony WAHT-SA20 Mode D'emploi page 7

2
Insert the wireless transmitter in
the slot on the S-AIR main unit.
For S-AIR main units that do not
include a wireless transmitter, prepare
the optional S-AIR Adapter (EZW-
T100).
For details, refer to the operating
instructions of the S-AIR main unit.
The illustration of the rear panel of an
S-AIR main unit is an example. Not all
S-AIR main units look exactly the
same.
Rear panel of the S-AIR main unit
3
Connect the speakers.
Connect the speaker cords to match the
color of the SPEAKERS jacks of the
unit.
x To connect the speaker cords
to the surround amplifier
When connecting to the surround
amplifier, insert the connector until it
clicks.
E
E U S
D A N C
IM P E 3 -1 6
K E R S
S P E A
0
- R T 1
E Z W
x To connect the speaker cords
to the speakers
Be sure to match the speaker cords to
the appropriate terminals on the
speakers: the speaker cord with the
color tube to 3, and the speaker cord
without the color tube to #. Do not
catch the speaker cord insulation in the
speaker terminals.
Connector
Gray
(Speaker
(R: right))
R
L
Blue
(Speaker
(L: left))
Color tube
Rear of
the speaker
3
#
7
US