Jacuzzi City Spa Manuel D'installation page 29

To prevent accidental falls into the spa, it is advisable to in-
stall the key-locking system provided with the thermal cover
( 4).
CAUTION
Read and follow all the instructions related to the use and
storage methods for chemical products, keeping strictly
to the manufacturers instructions on the packets.
Never clean the filter when the pump is running. Turn off the
main switch first.
Never start the pump and heater if the water level is not
above the highest whirlpool nozzles:
Always turn off the main switch when the spa is empty.
With the TEST button, periodically check the efficiency of
the circuit breaker installed up the line from the spa.
It is a good rule to empty the spa regularly (about every 4-8 weeks),
in order to ensure a change of water and proceed with tub cleaning.
If you are away for any length of time, it is advisable to empty
the spa, as long periods without carrying out water treatment can
damage the spa.
CAUTION
Before emptying, make sure that the chemical additive
values in the water are within the permitted limits.
If in doubt, contact the local authorities.
DO NOT EMPTY THE WATER INTO A SEPTIC TANK.
29