Unpacking & Warranty - Electro-Voice Dx46 Mode D'emploi

O ( )
UTPUTS EACH
• Array control (5-band equalizer +delay)
• Cross-over (hi-pass / low-pass filters), with selectable filter types
• 6-band parametric equalizer
• FIR filter with 512 Taps
• Delay
• Polarity
• Look-ahead Peak limiter with Peak RMS detection
• TEMP Limiter for long-term loudspeaker protection
• Level & Mute
• 24-bit, 48 kHz D/A converters
• Pilot tone generator
• VU Metering
• Output assignment display LEDs; sub, low, mid & high
• Mute button
• Gain reduction meters
A
DDITIONAL FEATURES INCLUDE
• Electronically balanced XLR inputs and outputs
• XLR thru connectors (analog + AES/EBU)
• -6 dB switchable input level pad
• Test generator (Sine, pink noise, white noise)
• Contact closure interface
• USB port (front) and Ethernet port (rear) for connection to PC with IRIS-Net software; preset editing and real time parameter
control and monitoring.
• Firmware updates via USB port or Ethernet port
• FLASH memory for preset storage and firmware upgrades
• 192 x 32 back-light graphic LCD display
• LCD navigation / editing controls
• DSP block direct access controls
• Auto-ranging internal power supply; 100-240 V AC, 50-60 Hz
• Standard IEC A.C. inlet with external, replaceable fuse
2.2 Unpacking & Warranty
Carefully remove the Dx46 from its packaging and packaging materials. Please save all packing materials and box,
should you ever need to return the Dx46 for warranty service. Included with the Dx46 is this Owner's Manual, War-
ranty card and A.C. power cable. Contact your distributor, dealer or installer if any of these items is not included.
Please save the warranty certificate and receipt; which must be presented at the time of warranty service for the
factory warranty to be valid.
:
D 46
X
9