Xo XOS30S Notice D'utilisation page 14

5. Insert the wires into the box, then close the box cover, securing it using the screws
that were previously removed.
The appliance should be installed at a
minimum height of 27" up to a maximum
height of 32" for optimal performance.
If a connection ductwork composed of
two parts is used, the upper part must
be placed outside the lower part. Do not
connect the range hood exhaust duct
air to the same duct air used to exhaust
hot air or fumes from other appliances
other than electrical. Before proceeding
with the assembly operations, remove
the anti-grease filter(s) (Fig.3) so that
the unit is easier to handle.
Fig.3
�����������������
���
XOS30S - XOS36S
- 14 -