Decommissioning - ecofort ecoQ CoolAir 8 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9.1. STORAGE
Long-Term Storage - If you will not be using the unit for an extended
period of time (more than a few weeks) it is best to clean the unit and
let it dry out completely. Please store the unit per the following steps:
1.
Unplug the unit and remove exhaust hose and window kit store with the
unit.
2.
Drain the remaining water from the unit.
3.
Clean the filter and let the filter dry completely in a shaded area.
4.
Collect the power cord at the water tank.
5.
Re-install the filter at its position.
6.
The unit must be kept in upright position when in storage.
7.
Preserving the unit in a ventilated, dry, non-corrosive and safe place
indoor.
ATTENTION:
The evaporator inside the machine must be dried out before the unit is
packed to avoid component damage and molds. Unplug the unit and place
it in a dry open area for a couple of days to dry it out. Another way to dry
the unit is to set the humidity point more than 5% higher than the ambient
humidity to force the fan to dry the evaporator for a couple of hours.

9. DECOMMISSIONING

29

Publicité

Table des Matières
loading

Table des Matières