ecofort ecoQ CoolAir 8 Mode D'emploi page 26

Switch off the unit before

operating.
Remove the plug of the water

outlet opening and keep it in a
safe place.
Securely and properly connect

the drain hose and make sure
it is not kinked and clear of
obstruction.
Place the outlet of hose over a

drain or bucket and ensure that
water can freely flow out of the
unit.
Do not submerge the end of

hose into water; otherwise it
can cause "Air Lock" in the
hose.
To avoid water spillage:
•
As the negative pressure of condensate drain pan is large, tilt
the drain hose downward toward the floor. It is appropriate that
the degree of inclination should exceed 20 degrees.
•
Straighten the hose to avoid a trap existing in the hose.
Remove the rubber
sealing plug.
Continuous drain hose
(Inner diameter=16mm)
24