Startup And Shutdown; Operation Mode; Ventilating Your Room - ecofort ecoQ CoolAir 8 Mode D'emploi

5.4 SETTINGS

5.4.1. Startup and Shutdown

Press POWER to turn the unit on.
The unit runs in FAN mode as default.
Press MODE button to select the desired operation mode.
Press POWER again to turn off the power.
5.4.2.

Operation Mode

The unit has four operation modes: Cool, fan, dry, sleep（Sleep mode
is only optional on the remote control）
A. Cooling Your Room
Select the cool mode to lower the temperature in your room.
Press MODE button repeatedly until the LED of COOL operation lights
up.
Press ADD/MINUS button to adjust the temperature which is displayed
on the screen. The temperature can be set between 16 ℃ and 32 ℃.
Press SPEED button repeatedly until the desired fan speed indicator
lights up.
To control the direction of the air flow horizontally, please adjust the inner
louver by hand.
Note： The air conditioner stops if the room temperature is lower than the
selected temperature.
B. Ventilating Your Room
Press MODE button repeatedly until the LED of FAN operation lights up.
In ventilation mode the room air is circulated, but not cooled.
Press SPEED button repeatedly to select the fan speed as desired.
21