Timer Setting - ecofort ecoQ CoolAir 8 Mode D'emploi

C. Drying Your Room
Press MODE button on the control panel or remote control, the LED of
DRY operation lights up. The fan speed is not selectable. The user should
connect the hose to the drain outlet at the bottom of the unit.
Note: In this mode, the fan speed switches over to low speed and the
temperature cannot be selected.
D. Sleep Mode （ this function can only be used with the
remote control）
The sleep mode can be activated when in COOL mode.
In COOL Mode:

After 1 hour the preset temperature is increased by 1 ℃, after another
hour the preset temperature will again be increased by 1 ℃.

5.4.3. TIMER SETTING

The timer has two ways of operation:
To turn off
(When power on)
To turn on
(When power off)
Cancel timer
（1-24 hours）:
Press Timer key to
turn on the timer
function.
Press Timer key to
turn on the timer
function.
Press ADD/MINUS repeatedly until the LED shows '00'.
Note: when press POWER will also exit the timer setting.
Press ADD/MINUS
repeatedly to set the
delay OFF time.
Press ADD/MINUS
repeatedly to set the
delay ON time.
22