Messages; Error Messages - Teac LP-R660USB Mode D'emploi

TRACK 0 0:00
A blank CD-R/CD-RW disc has been loaded.
bUSY
The unit is reading the disc. Wait a few seconds.
CLOSE
Close the disc tray.
ErASE
Erase the last track of the CD-RW disc.
ErASEALL
Erase all the tracks of the CD-RW disc.
FInAL
Finalize the disc.
–40db, –30db or –20db
AUTO REC mode settings for automatic track-number assignment
nO dISC
No readable disc has been loaded.
OPEn
Open the tray.
- - - -:- -
The unit is reading the disc.
P-**
Program number
UnFInAL
Unfinalize the CD-RW disc.

Messages

Error Messages

dISCFULL
There is no space on the disc, or no more tracks are available.
P-FULL
32 tracks have been programmed. No more tracks can be
programmed.
Err **
An error occurred within the unit.
Press the POWER switch to turn the unit off, wait a minute, and
turn it on again.
dISC Err
An error disc or irregular-shaped disc has been loaded.
dAO dISC
The unfinalize function cannot be performed with discs recorded
using the "Disc at Once (DAO)" recording system.
d dISC
A CD disc other than Audio CD (Video CD, MP3, Data CD etc.) has
been loaded.
(** is variable.)
33