Safety Instructions; General Safety Instructions; Machine-Related Safety Instructions - Festool CARVEX PSC 400 EB Notice D'utilisation D'origine

CARVEX
GB
Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Conservation charging current, pulsating
Charging times for
Permitted charging temperature range
Temperature monitoring
Battery pack
Order number
Voltage
Capacity
Weight
5

Safety instructions

5.1

General safety instructions

WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for fu-
ture reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
5.2 Machine-related safety instruc-
tions
– Hold power tool by insulated gripping
surface, when performing an operation
where the cutting accessory may con-
tact hidden wiring. Cutting accessory con-
tacting "live" wire may make exposed metal
parts of the power tool "live" and could give
the operator an electric shock.
– The charger and power tool are not in-
tended for use by persons (including
children) with limited physical, sensory
or mental ability or without sufficient
experience and/or knowledge, unless
they are supervised by a person respon-
sible for their safety or have been in-
structed on how the charger or power
tool is to be used.Children should always be
supervised to ensure that they do not play
with the charger or the power tools.
– Festool electric power tools must only
be installed on work tables provided by
16
LiIon 1.3 Ah/ 2.6 Ah, 80 %
LiIon 1.3 Ah/ 2.6 Ah, 100 %
BPS 12 Li
494831
10.8 V
1.3 Ah
0.49 kg
BPS 15 Li
494832
14.4 V
2.6 Ah
0.58 kg
Festool for this purpose. If the tool is in-
stalled in another, or self-made, work table, it
can become unstable and result in serious ac-
cidents.
– Wait until the power tool stops com-
pletely until placing it down. The tool can
become entangled and lead to a loss of con-
trol of the power tool.
– Do not open the battery pack or the charger.
Even after disconnection from the mains,
there is still a high capacitor voltage inside
the charger.
– Make sure that metal objects (such as metal
chips) do not collect in the battery pack re-
taining slots or enter the machine through
the air vent slits (danger of short circuit).
– Do not charge battery packs from external
manufacturers. The charger is designed for
charging original battery packs only. Other-
wise there is a danger of fire and explosion.
– Protect the battery pack from excessive heat
or constant heat sources such as sunlight or
naked flames. There is a risk of explosion.
– Never use water to extinguish burning LiIon
battery packs, always use sand or a fire blan-
ket.
– Deformed or cracked saw blades and saw
blades with blunt or broken cutting edges
must not be used.
– Always place the pendulum jigsaw on the
workpiece with the saw blade running.
TRC 3
220 - 240 V ~
50/60 Hz
7.2 - 18 V=
max. 3 A
approx. 0.06 A
approx. 22/ 45 min
approx. 35/ 70 min
-5 °C to +45 °C
via NTC resistor
BPS 18 Li
498057
18 V
2.6 Ah
0.67 kg