Table Des Matières; Symbols; About This Manual; Safety Warnings - Festool CARVEX PS 420 EBQ Notice D'utilisation D'origine

English
Contents
1 Symbols....................................................... 6
2 About this manual....................................... 6
3 Safety warnings...........................................6
4 Intended use................................................9
5 Technical data............................................. 9
6 Parts of the machine...................................9
7 Operation................................................... 10
8 Settings......................................................10
9 Working with the electric power tool........13
10 Service and maintenance..........................14
11 Accessories............................................... 14
12 Environment.............................................. 17
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear a dust mask.
Wear ear protection.
Wear protective goggles.
Wear protective gloves.
Connecting the mains power cable
Disconnecting the mains power cable
Tip or advice
Handling instruction
Safety class II
V volt
A amperes
Hz hertz
~
alternating current
a.c.
direct current
d.c
n
no load speed
0
6
revolutions per minute
min -1
" inch
lb. pound
diameter
Nm Newton metre
mm millimetre
° angular degree
2

About this manual

Save these instructions
It is important for you to read and understand
this manual. The information it contains relates
to protecting your safety and preventing prob­
lems. The symbols below are used to help you
recognize this information.
DANGER Description of imminent
hazard and failure to avoid
hazard will result in death.
WARN­ Description of hazard and
ING possible resulting injures
or death.
CAUTION Description of hazard and
possible resulting injuries.
NOTICE Description of possible
damage of the device or its
surroundings.
3

Safety warnings

3.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1 WORK AREA SAFETY
Keep work area clean and well lit. Clut­
a.
tered or dark areas invite accidents.
Do not operate power tools in explosive
b.
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.