Baby Jogger city mini 2 Instructions D'assemblage page 12

Masquer les pouces Voir aussi pour city mini 2:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
adjust and fasten safety harness.
EN
WARNING: Always use the crotch
strap in combination with the
shoulder straps and waist belt.
19 Slide the harness pads up to access
plastic guide on strap.
20 Hold the plastic guide and pull strap
to tighten or loosen.
USING SAFETY HARNESS
21 Insert side strap buckle into harness
buckle on both sides.
22 Insert connected harness and side
strap buckles into the sides of the
crotch buckle.
23 Press button on crotch buckle to
release.
RECLINE THE SEAT
24 Pinch the clamp behind the seat,
and slide it down to desired recline.
25 Pull seat down on both sides to
match the clamp position. Reverse
steps to return to the upright
position.
WARNING: When making
adjustments to the pushchair seat,
make sure child' s head, arms, and
legs are clear of moving seat parts
and pushchair frame.
26 For extra ventilation, roll up the seat
back flap and secure with elastic and
.
button
LEG SUPPORT
27 To use the leg support, lift the front of
the seat pad
28 Rotate the support arm out and lower
the seat pad. Lock the support arm
29 To lower leg support, reverse the steps
FOLDING
• Remove your child from the seat.
• Disengage front wheel swivel locks.
• Remove all attachments and all
items from basket.
WARNING: To prevent injury,
remove Child Tray or Belly Bar
accessory when folding or unfolding
the pushchair.
30
A. Insert finger into loop and pull up,
then B. Pull up on the "Pull to Fold"
folding handle and let the frame
.
collapse.
31 Make sure the auto-lock lever clicks
into place.
BASKET REMOVAL
32 From the front of the pushchair,
unsnap the 2 snaps and pull the straps
out of foot well
33 Lift basket off the hook
34 From the back, lift the top of basket off
the tab on both sides of frame
35 Remove the strap from the C clamp
on both sides of frame
REMOVING THE SEAT PAD
36 Flip the pushchair over to expose the
seat bottom
A Unfasten the 2 fastening strips
and pull them out of the pushchair
.
frame
B Unfasten the fastening strip and
pull them out of the sides of the
pushchair frame
C Unscrew the right carabiner hook
and pull strap out from the seat pad
37 Flip the seat back over on its
wheels. Pull seat fabric up and off of
buttons.
38 Starting from the bottom, slide the
seat pad out from pushchair frame
on both sides.
39 From the top, slide the seat pad out
of the frame on both sides.
40 Remove seat pad.
Reverse the steps to reattach the seat pad
.
.
to the frame
.
WARNING: Make sure that all
fasteners are properly closed when
re-attaching the seat pad.
12
.
.
.
.
.
.
.

Publicité

Table des Matières
loading

Table des Matières