Glow Fire Neptun Mode D'emploi page 5

ASSEMBLY INSTRUCTIONS
STEP 1:
Find a safe location. If you want to use the wall fireplace's heating function, keep a safe distance
to the side, top and bottom of flammable and heat-sensitive objects
If you do not use the fireplace's additional heating function, you do not need to keep any safety
distances!
Important NOTE:
If you install the fireplace in the wall, you can use the decorative flame effect, but not the
heating function of the fireplace. In addition, the fireplace can then only be used via the remote
control (not via the control panel on the body).
Choose a location near an electrical outlet, an extension cord is not required.
Always make sure that the device is disconnected from the socket
before starting installation! NEVER move or clean the fireplace or
change the lightstripes while the plug is inserted.
Body recommendation on each side: 19.7 "(50 cm).
Recommendation from the body down: 19.7 "(50 cm).
Recommendation from the body up: 27.5 "(70 cm).
5