Glow Fire Neptun Mode D'emploi page 3

INSTALLATION AND IMPORTANT NOTES:
Remove all packaging materials. Check that all necessary parts are present; if parts are
•
damaged or missing, contact your specialist dealer.
• Before using for the first time, check whether the mains voltage corresponds to the in-
formation on the nameplate.
The device must not be used in potentially explosive areas, where materials such as fuel,
•
thinner, paints and varnishes are stored.
Attention: To avoid overheating, the heating must not be covered.
•
• Do not place this electric fireplace directly on carpets or other similar floor coverings.
This is to avoid possible discoloration from the heat.
• Do not use this heater in the immediate vicinity of a bathtub, shower or swimming pool.
Do not operate the power plug with wet or damp hands.
•
Always pull the plug before cleaning and when the device is not in operation.
•
Do not connect the device to a damaged socket.
•
• Do not place any objects inside the device and prevent foreign objects from entering the
device. This can result in electric shock, fire or damage to the heater.
• Do not move the device during operation.
If the power cord is damaged, it must be replaced by the manufacturer, its customer ser-
•
vice or a similarly qualified person in order to avoid a hazard.
This device is intended for use in households and similar applications
•
• This heater is not suitable for installation in vehicles and machines.
• WARNING: This heater is not equipped with a room temperature control device. Do not
use this heater in small rooms if it is occupied by people who are unable to leave the
room alone, unless permanent supervision is provided.
3