Safety Instructions For Using A Pruning Saw; Personal Protection - Husqvarna PAX1100 Manuel D'utilisation

When the length of the cutting teeth has worn down to
only 5/32 inch (4 mm) the chain must be replaced.
Chain drive sprocket
Regularly check the degree of wear on the drive sprocket.
Replace if wear is excessive.
Guide bar
Check regularly:
• Whether there are burrs on the edges of the bar.
Remove these with a file if necessary.
• Whether the groove in the bar has become badly
worn. Replace the bar if necessary.
• Whether the tip of the bar is uneven or badly worn. If
a hollow forms on the underside of the bar tip this is
due to running with a slack chain.
12 – English
SAFETY INSTRUCTIONS
To prolong the life of the bar you should turn it over daily.
WARNING! A faulty cutting attachment
!
may increase the risk of accidents.
Safety instructions for using a
pruning saw
WARNING! The machine can cause
!
serious personal injury. Read the safety
instructions carefully. Learn how to use
the machine.
WARNING! Cutting tool. Do not touch the
!
tool without first switching off the
engine.
CAUTION! Please read the operator's manual carefully
and make sure you understand the instructions before
using the machine.

Personal protection

• Always wear boots and other equipment described
under the heading Personal protective equipment.
• Wear sturdy, non-slip boots.
• Always wear working clothes and heavy-duty long
trousers.
• Never wear loose clothing or jewellery.
• Make sure your hair does not hang below shoulder
level.