Sony BRAVIA KLV-40ZX1M Mode D'emploi page 9

Anchor the Unit to the Wall
Remove the two screws from the top-most wall-
mount holes located on the rear of the Unit.
Use the hardware listed below (not supplied):
• Two M6 × 10-12 mm anchor bolts (screw into
the top-most wall-mount holes located on the
rear of the unit)
• Rope or chain (attach to one M6 anchor bolt)
• Wall-anchor (attach to the wall stud) strong
enough to support the weight of the unit (pass
the rope through the wall-anchor, then attach
to the other M6 anchor bolt)
Wall-mount holes
Anchor bolts
~
• Securing the unit to the stand without securing it and
the stand to the wall provides minimum protection
against the unit toppling over. For further protection,
follow all three measures recommended above.
Rope or chain
Wall-
anchor
9
US