Locating Inputs; Connecting The Ac Power Cord And Hdmi Cable - Sony BRAVIA KLV-40ZX1M Mode D'emploi

2. Locating Inputs

~
• This unit displays all video input signals in a resolution of 1,920 dots × 1,080 lines.
Item
1 AC IN
2 HDMI IN

Connecting the AC Power Cord and HDMI Cable

1
Connect the AC power cord (supplied) to the AC IN jack and the HDMI cable (supplied) to the HDMI
IN jack on the rear of the unit, then use the hooks to store them in the back of the Table-Top Stand.
2
Hang the stand cover over the top of the Table-Top Stand's center post, and then push down to close
until you hear a click.
~
• To avoid pinching the AC power cord and the HDMI cable, ensure that these cables run under the notches on
either side of the stand cover.
3
Attach the terminal cover (supplied) to the unit.
10
US
Description
Connects to your power source. Connect the supplied power cord to AC IN and the
nearest wall outlet.
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between this LCD Monitor and any HDMI-equipped A/V
equipment. HDMI supports enhanced, or high-definition video, plus digital audio.
Stand cover Hooks
Center post
Notch
Hooks
Stand cover
Terminal cover