Sony BRAVIA KLV-40ZX1M Mode D'emploi page 25

4
Insert the Speaker System.
Insert in the junction part for the
stand of the LCD Monitor.
Insert this part under the Bracket I J.
5
Fix the Speaker System with screws, then
attach the hook M to the Bracket I J.
Tighten the upper two screws (temporarily
fixed in step 3).
O
M
Speaker System
Screws (supplied with
your Speaker System)
Screws M6 ×
20 (supplied
with your LCD
Monitor)
6
Connect the AC power cord (supplied with
your LCD Monitor) and the HDMI cable
(supplied with your LCD Monitor), then drop
them down from the center of the LCD
Monitor.
1 Connect the power cord.
7
Follow the instruction manual supplied with
the Wall-Mount Bracket to continue the
installation.
~
• You cannot connect cables to the LCD Monitor after it
is wall-mounted or installed on the Floor Stand.
• When installing the LCD Monitor to a wall or the
Floor Stand, lift the unit together with the cloth under
the unit. Do not hold the speaker grill.
2 Drop the cord down
from the center.
25
US