Operating The Lcd Monitor; Inserting Batteries Into The Remote Control; When Using The Remote Control; Lcd Monitor Control And Remote Control Button - Sony BRAVIA KLV-40ZX1M Mode D'emploi

Operating the LCD Monitor

Inserting Batteries into the Remote Control

Insert two size AA batteries (supplied) by matching e and E on the batteries to the diagram inside the
battery compartment of the remote control.
For details, see Operating Instructions for the remote control RM-VL610A (supplied).

When Using the Remote Control

LCD Monitor Control and Remote Control Button

6
7
8
9
Follow the guidelines below
• Point your remote control directly at the IR sensor located on your
LCD monitor.
• Make sure that no objects are blocking the path between the
remote control and the IR sensor on your LCD monitor.
• Fluorescent lamps can interfere with your remote control; try
turning off the fluorescent lamps.
• If you are having problems with the remote control, reinsert or
replace your batteries and make sure that they are correctly
inserted.
1
2
Buttons on the LCD monitor operate the same as the corresponding
buttons on the remote control. Refer to the remote control operating
instructions (supplied).
~
• The V button has a tactile dot. Use it as a reference when operating the LCD
3
monitor.
4
• When operating the LCD monitor, press a button (except POWER button)
5
on the unit once to light up all the indicators and press again to operate the
function. All indicators will fade out after a period of time.
3 4 4,7 4 1
(Continued)
13
US