Samsung SPF-87H Manuel De L'utilisateur page 4

While playing a Slideshow, you can switch the Slideshow Mode by
※
pressing the [
Clock
Date and Time, Time Format, Date Format, Clock Type
Settings
Language, Brightness, Auto Fit Portrait Photo, Frame Memory Copy, Activate
Options
USB Communication
Preference Starting Mode, Screen Saver, Home Background, Auto Picture On/Off
Update/Reset Firmware Update, Reset Settings, Product Information
Updating the firmware
Preparations
・ Digital Photo Frame, Firmware update file, SD card or USB memory stick.
Updating
Please visit the Download Center (http://www.samsung.com) and download the firmware by searching the
・
model name.
・ Please download appropriate firmware and decompress it.
Please copy the decompress file (***.isp) to either an SD card or USB memory stick and connect
・
to the Digital Photo Frame.
・ Please select [Settings] - [Update/Reset] - [Firmware Update] for firmware update.
When update is completed, please turn off, then turn on the Digital Photo Frame.
・
・ The firmware version can be checked through [Settings] - [Update/Reset] - [Product Information]
Mini-monitor mode
You can use this product as an auxiliary monitor as well as a monitor to view photos.This feature enables you
・
to work more efficiently than that with single monitor.For this purpose, install an additional Frame Manager
program and connect the USB cable supplied with the product to a PC. For more information about the
installation procedures and downloading the program, please visit the http://www.samsung.com website.
(Only one auxiliary monitor is supported.)
4
Multiview 2
・ Multiple Photos are displayed
overlapping on the screen in turns.
The following modes
[Transition(Slideshow Settings), Rotate,
Zoom, AspectRatio, Delete, and Set as
Background] are not available.
] button.
Troubleshooting
Symptoms
The USB memory device or Connect the storage device to a PC and check if it is recognized. If it
SD card is not recognized. is not recognized, format the storage device and then try again.
This product is only turned on automatically when it has been turned
I have set the On Timer, but
off automatically by the Off Timer. If you manually turn the product off
the product is not turned on
after setting the On Timer function, it will not be automatically turned
automatically.
on.
Screen blinks steadily
or the power abruptly This is due to unstable USB connection power supply from PC. So
turns off, when using the please make sure that the sub (DC 5V) USB connector is connected
power through USB Cable to PC as well.
connection.
Specifications
Items
Model Name
Type 8" TFT LCD
Panel
Resolution 800 x 480
Supported Formats
Built-in Memory
USB
Rating
Power
Normal mode: 5.2W
Consumption
Power off mode: Under 1W
236.0 (W) x 159.4 (H) x 23.0
Dimensions (D) mm
(WxHxD) (9.29 (W) x 6.28 (H) x 0.91
General
(D) inch)
Weight 500g (1.1 lbs)
The product design may differ according to the model, and specifications are subject to
・
change without prior notice for product performance enhancement.
Causes and Actions
Specifications
SPF-87H SPF-107H
10" TFT LCD
1024 x 600
JPEG (Progressiv, CMYK JPEG is not supported)
1GB
Host (USB 1.1) / Device (USB 2.0)
External DC power adapter (12V)
Normal mode: 5.9W
Power off mode: Under 1W
236.0 (W) x 188.0 (H) x 23.0
(D) mm
(9.29 (W) x 7.40 (H) x 0.91
(D) inch)
600g (1.3 lbs)