Maintenance And Service; Battery Maintenance; After-Sales Service And Application Service - Bosch AdvancedRotak 36-650 Notice Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
24 | English
Problem
Possible Cause
Blade nut/bolt loose
Excessive vibrations/
Blade nut/bolt loose
noise
Cutting blade damaged
Battery and charger
Problem
Possible Cause
Red battery charge in-
Battery not (properly) inserted
dicator on charger
Battery contacts contaminated
flashes
No charging procedure
possible
Battery defective
Battery charge indic-
Mains plug of battery charger not plugged in
ator on charger does
(properly)
not light up
Socket outlet, mains cable or battery charger de-
fective

Maintenance and Service

Battery Maintenance

Warning! Switch off, remove the isolator switch, bat-
u
tery and grass bag before adjusting or cleaning.
Always wear gardening gloves when handling or work-
u
ing near the sharp blades.
Use the following procedures to enable optimum usage of
the battery:
– Protect the battery against moisture and water.
– Store the machine and battery only within a temperature
range between –20 °C and 50 °C . As an example, do not
leave the battery in the car in summer.
– It is recommended that the battery is not stored within
the product but stored separately.
– Do not leave the battery in the product in direct sunlight.
– The ideal storage condition for the battery is 5 °C.
– Occasionally clean the venting slots of the battery using a
soft, clean and dry brush.
A significantly reduced working period after charging indic-
ates that the battery is used and must be replaced.
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
1 609 92A 5BS | (14.10.2019)
Corrective Action
Tighten blade nut/bolt (27 Nm)
Tighten blade nut/bolt (27 Nm)
Replace cutting blade (see figure K)
Corrective Action
Properly insert battery in charger
Clean the battery contacts (e. g. by inserting and
removing the battery several times) or replace
the battery
Replace the battery
Insert mains plug (fully) into the socket outlet
Check the mains voltage; have the battery char-
ger checked by an authorised after-sales service
agent for Bosch power tools
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Bosch Power Tools

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières