Declaration Of Conformity - Elbro SMSB-M20T-AB Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SMSB-M20T-AB
Notification SMS
Error Notification SMS
The device sends this SMS if the command sent does not exist or cannot be activated, or if the com-
mand parameter is not valid. Content of this notification SMS is:
ERROR!
If the command SMS starts with a wrong password, (4 digit followed by #) the notification SMS is:
Invalid password!
The device does not send any type of notification SMS if the SMS received is not recognized as valid
(ex. do not start with 4 digits).
Command notification SMS
In Bistable mode, display the output status, in pulse mode, confirm the execution of the command.
Pulse Mode: Command Executed.
• Bistable Mode: ON/OFF (depending on the relay status)
Status Notification SMS
The device send this SMS after executing any of the command (excluding P). A status Notification SMS
contains the information regarding the current status of the output and the function activated.
Pulse Mode, 3 sec pulse
Bistable Mode
Bistable Mode, command notification ON, T
Pulse Mode, 5sec pulse, command notification On
Phone Book Modification Notification SMS
This SMS contains information regarding the adding/deleting of an enabled user in/from the phone book.
• Adding: Added: Phone Number
Ex: Added:+413344556666
• Deleting: Deleted: Phone Number
Ex: Deleted:+413344556666
• Deleting all users:
Ratings
Power supply:
Volts: 9-24V DC
Average power consumption:
Standby: 40mA
Output
Type: bistable relay SPDT
Contact Load Capacity (MAX):
0.25A
250VAC
62.5VA
0.5A
125VAC
62.5VA
2A
30VDC
60W
Warranty
Elbro devices are manufactured under strict quality control. The device has a 12 months warranty (valid
only with receipt) against any manufacturing or material faults, valid only for devices not opened and not
repaired by third people.
Damage resulting from mechanical effects or improper handling are not covered by the guarantee.

Declaration of Conformity

Hereby, Elbro AG declares that the device SMSB-M20T-AB is in compliance with the essential re-
quirements and other relevant provision of Directive 1999/5/EC.
Stato
FUNCTION
Deleted All
Amps: 1A
Sending/Receiving of SMS: 100mA
On
SMS di notifica
Pulse 3 sec
ON o OFF
ON. SMS. T: 18,5C
Pulse 5s. SMS
E
N
G
L
I
S
H
31

Publicité

Table des Matières
loading

Table des Matières