Filtration System - KitchenAid KDTM354EBS Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Your dishwasher has the latest technology in dishwasher filtration. This triple filtration system minimizes sound and optimizes water and
energy conservation while providing superior cleaning performance. Throughout the life of your dishwasher, the filter will require
maintenance to sustain peak cleaning performance.
The triple filter system consists of 2 parts, an upper filter
assembly and a lower filter.
The upper filter assembly keeps oversized items and
foreign objects, along with very fine food particles, out
of the pump.
The lower filter keeps food from being recirculated onto
your dishware.
The filters may need to be cleaned when:
Visible objects or soils are on the Upper Filter Assembly.
There is degradation in cleaning performance (that is,
soils still present on dishes).
Dishes feel gritty to the touch.
It is very easy to remove and maintain the filters. The chart below shows the recommended cleaning frequency.
RECOMMENDED TIME INTERVALS TO CLEAN YOUR FILTER
Number of Loads
If you wash
Per Week
before loading
1-3
Once per year
4-7
Once per year
8-12
Once per year
13-14
Once per year
*Manufacturer's recommendation: This practice will conserve the water and energy that you would have used to prepare your dishes. This
will also save you time and effort.
Very Hard Water
If you have hard water (above 15 grains), clean your filter at least
once per month. Building up of white residue on your dishwasher
indicates hard water. For tips on removing spots and stains, see
"Troubleshooting" section.
Filter Removal Instructions
1. Turn the Upper Filter
Assembly ¼ turn counter-
clockwise and lift out.
2. Grasp the Lower Filter in
the circular opening, lift
slightly, and pull forward
to remove.
3. Clean the filters as
shown below.

Filtration System

(for models with EQ filtration system)
If you scrape and rinse
before loading
Once per year
Once per year
Twice per year
Twice per year
To remove Upper Filter Assembly
If you only scrape
before loading*
Twice per year
Twice per year
Every three months
Every three months
Cleaning Instructions
IMPORTANT: Do not use wire brush, scouring pad, etc., as they
may damage the filters.
Rinse filter under running water until most soils are removed. If you
have hard-to-remove soils or calcium deposits from hard water, a
soft brush may be required.
Upper Filter
Assembly
Lower Filter
If you do not scrape or rinse
before loading
Every two months
Once per month
Every two weeks
Once per week
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kdtm404ebs1Kdtm384ebs

Table des Matières