ABB SAS-W 11c Série Guide Rapide page 42

Busch-/ABB-secure@home
Name New Sensor
6
Perimeter Detector
Supervision:
<15
7
Exclude
<No
The configuration steps may vary according to the
characteristics of the installed security device.
Assign to Zone
Outdoor Area
Add New Zone
8
Unpaired devices
Step 8 is applicable only for anti-intrusion sensors. Safety
sensors (smoke, flooding) are automatically assigned to an
H24 active zone.
System devices (remote controls, sirens, repeaters, etc.) are
not assigned to any specific zone.
Central Unit / Central Unit with GSM
42
FG3827FC
>
>
COMMISSIONING
Max - 16
5
CHAPTER
Rev. 1.0