General - Titan 264 001300 Série Traduction De La Notice Originale

2.

General

These operating instructions are meant to facilitate the familiarization with the unit and the
intended use. The operating instructions contain important instructions on how the unit can
be operated safely, as intended and economically. Following the instructions helps avoid
risks, reduce repair works and downtimes and increases the reliability and life of the unit.
These operating instructions must be available at the place where the unit is operated. They
must be read and applied by all persons working with the unit. Such works especially
include operation, troubleshooting and maintenance.
Apart from the operating instructions and the regulations for the prevention of accidents
being applicable in the country where the unit is operated and on site the recognized
technical rules for safety-related and competent works have to be observed.
Explanatory notes on the warning and instruction symbols:
This unit is characterized by:
Highest performance in relation to tensile force and tensioning speed
Robust durable construction
Air connection possible „on top" as well „laterally"
No more pneumatic piping, which guarantees absolutely ergonomic design for
handling
Easy processing of 19 x 0,63 Mega-strap
Copyright © TITAN Umreifungstechnik GmbH & Co.KG 2011 All rights reserved.
The contents of this document must not be duplicated, handed to third parties, published or saved in any form,
neither fully nor partly, without prior written permission by TITAN Umreifungstechnik GmbH & Co.KG.
MAX-L
Caution!
Is used in case of risks for life and health.
Attention!
Is used in case of risks which might cause damage to objects.
Note!
Is used for general instructions and for remarks whose disregard
may cause faults in operations.
is a registered trademark of TITAN Umreifungstechnik GmbH & Co.KG.
H 264 EU 25/12
19 / 53