General - Titan HPE-L Notice D'instructions

2.

General

These operating instructions are meant to facilitate acquaintance with the unit and its
intended use. They include important information on how the unit can be applied safely, as
intended and economically. Meeting instructions helps avoid risks, reduce repairs and
downtimes as well as increase the reliability and life of the unit.
The operating instructions must be available at the location where the unit is used. They
must be read and applied by all persons working with the unit. Such works especially include
operation, troubleshooting and maintenance.
Apart from the operating instructions and regulations for the prevention of accidents
applicable in the operator's country and at the place of erection; further, the acknowledged
technical rules for safety-related and competent work have to be observed.
Explanatory notes on the warning and instruction symbols:
Copyright © TITAN Umreifungstechnik GmbH & Co.KG 2011 All rights reserved.
The contents of this document must not be duplicated, handed to third parties, published or saved in any form,
neither fully nor partly, without prior written permission by TITAN Umreifungstechnik GmbH & Co.KG.
HPE
Caution!
Is used in case of risks to life and health.
Attention!
Is used in case of risks which may cause damage to objects.
Notice!
Is used for general information and notes, whose disregard
may lead to faults in the course of operations.
is a registered trademark of TITAN Umreifungstechnik GmbH & Co.KG.
H 224 EU 21/06
19 / 54